|
HB Performance Systems, Inc. Job Description
Assemble components and operate assembly operations as required.
Operate various machines, (riveter, air ratchets, testers, presses, etc...)
and operate a number of machines or testers simultaneously throughout the day
.
Verify and maintain quality of work produced.
Complete all tags, cards and charts.
Train and assist
other
assemblers
in cell of expertise
.
Essential Duties and Responsibilities
- Prepare work area. Check Blueprints, routings, and validate REV levels match production schedule. Validate components as defined by blueprint.
- Set-up jobs and assists other assemblers with set-ups and start-ups.
- Assemble all components properly following standard work procedures, specific work instructions, or instructions from Supervisor, Engineer, Manager or Lead person.
- Visually inspect parts for chips, burrs, cleanliness, broken tooling, defective paint and porosity.
- Complete scrap tags, mark defective area and place in designated scrap carts.
- Document all customer names, all heat and lot numbers, such as rubber products, friction material, part counts, material codes, and shipping part numbers.
- Perform "first-piece inspections" and various unsupervised routine inspections, visually or with the use of checking devices.
- Prepare all finished units for shipment.
- Verify and maintain the quality of work produced through visual inspection, testing, and inspection work instructions. Notify supervisor or lead of any nonconformity, and document as required.
- Perform 6S daily and maintain a safe and clean work area complying with procedures. This includes mopping, sweeping, emptying mop and water buckets, and cleaning machines.
- Follow all ISO established procedures and participate in continuous improvement.
- Consistently demonstrate/be a team player, respectful, cooperative, trustworthy, and willing to help and to take ownership in solving problems.
- Participate in LEAN/Kaizen activity as requested
- Complete JITS, OEE, Shop Trak, and hour x hour production boards in accordance with standards.
- Actively engage in learning more than one assembly cell
- Follow all corporate policies and procedures including contract language for professional standards.
Requirements of Knowledge, Skill and Ability
- Must have the ability to read, comprehend and follow documented standard work instructions in order to perform the duties described above.
- Must be able to follow production and quality standards while documenting in the ERP system (Syteline) such as JITS.
- Must possess the ability to perform basic arithmetic required for charting and calculating order quantities.
- Ability to meet production requirements as defined by Takt Time with strong attention to detail and quality procedures as defined by all work instructions and standard operational documents.
- Ability to stand 85-100% of the time.
- Comprehensive understanding of part defects, as well as assembly practices.
- Ability to identify part defects.
- Ability to document and communicate any part shortages, disruptions and/or any positive progress during the workday.
| Physical Requirements |
Occasional
3 - 33% |
Frequent
34 - 66%
|
Continuous
67 - 100% |
Never to Rarely
0 - 2% |
|
Standing |
|
|
X |
|
|
Sitting |
X |
|
|
|
|
Walking |
|
X |
|
|
|
Climbing |
X |
|
|
|
|
Work at Heights |
|
|
|
X |
|
Bending |
|
|
X |
|
|
Crouching/Stooping |
X |
|
|
|
|
Pushing/Pulling |
X |
|
|
|
|
Twisting |
|
|
X |
|
|
Reaching |
|
|
X |
|
|
Lifting/Lowering |
|
X |
|
|
| Weights |
|
1-15 lbs. |
|
|
X |
|
|
15-35 lbs. |
|
X |
|
|
|
35-50 lbs. |
X |
|
|
|
|
Over 50 lbs. |
|
|
|
X |
| Ranges |
|
Floor to Knuckle |
X |
|
|
|
|
Horizontal |
|
|
X |
|
|
Vertical (above) |
|
X |
|
|
| Other Physical Requirements |
|
Hand-Eye Coordination |
|
|
X |
|
|
Hand Work |
|
|
X |
|
|
Foot Pedal Operation |
X |
|
|
|
Hourly positions, regardless of Job Code or Grade, are filled at
management discretion and determined by business unit need.
Approved by Tim Hake
Grade 305
04/2018
|
Staffing Support Specialists
Sep 22, 2026